Before installing any Software Update, please refer to TEC90813 and DWN59018 in the Other Useful Articles section below. These articles detail RM's recommendations regarding Software Update installation and support.

Any references to Community Connect™ 3 in this document apply equally to RM Smart-Tools 3.

• HFXCC3204 should be installed on Community Connect 3 networks using Station Access Control.
• This update should be installed on to all Community Connect 3 Domain Controllers.

Note: Servers will not need to be restarted after applying this software update, but all workstations will need to be restarted in order to install the updated client package. You should therefore plan to install the update out-of-hours to minimise disruption to your network.

HFXCC3204 will update RM Client Security Module to version 2.13.183.0.

HFXCC3204 needs to be installed on all Community Connect 3 Domain Controllers. Servers will not need to be restarted after applying this software update.

It is not always possible for Station Access Control to correctly determine the security group membership for the workstation that results in a more restrictive template being applied. This is mainly the case when attempting to use the No Station Security template.

This issue has been fixed so it is now possible to switch to any of the security groups and the correct template will now be applied.

1. Click the HFXCC3204.exe file link below to download the update.
2. Choose to Save the file, browse to the temporary location you wish to save it to (for example D:\temp) and click Save.
3. When it has downloaded, follow the Installation Instructions below to install the update.

1. Download HFXCC3204.exe.
2. Log on to your first Community Connect 3 domain controller as a System Administrator and copy the update to a temporary location (for example D:\temp).
3. Run the update by double-clicking the self-extracting executable file (HFXCC3204.exe). The update will extract files automatically and run the RM Installation Assistant to begin the installation.
4. When prompted, click Continue.
5. The installation will proceed automatically. When prompted that the RM Installation Assistant has finished, click Finish.
6. Repeat steps 2-5 at all your other Community Connect 3 domain controllers.
7. Restart the workstations at your convenience for the updated package to be installed.

1. Browse to D:\RMNetwork\RMManage\RM Hotfixes\HFXCC3204_extracted and double-click the file RM Installation Assistant.exe. Note: If this folder or its contents does not exist, re-run the HFXCC3204.exe file downloaded from the RM Support Web site as in step 1 of the Installation Instructions section above.
2. Follow the procedures from step 4 in the Installation Instructions section above.