Any reference to Community Connect� 3 in this document apply equally to RM Smart-Tools 3.

Microsoft� has released significant Security Updates for Windows�. HFXCC3267 contains these updates in a format easily applied to Community Connect 3 networks.
Note: We recommend that you apply this Security Update without delay.
Before installing any Software Update, please refer to TEC90813 and DWN59018 in the Other Useful Articles section below. These articles detail RM's recommendations regarding Software Update installation and support.

At the time of writing this article there were no known issues related to HFXCC3267.

• HFXCC3267 should be installed on Community Connect 3 networks with Service Release 5 (SR5) or above.
• This Security Update should be installed on to all Community Connect 3 servers.

Note: All servers and workstations will need to be restarted in order to install this Security Update completely. You should therefore plan to install the Security Update out-of-hours to minimise disruption to your network.

HFXCC3267 contains the following Microsoft Security Updates: 

1. MS10-083 - Vulnerability in COM Validation in Windows Shell and WordPad Could Allow Remote Code Execution (2405882)
2. MS10-090 - Cumulative Security Update for Internet Explorer (2416400)
3. MS10-091 - Vulnerabilities in the OpenType Font (OTF) Driver Could Allow Remote Code Execution (2296199)
4. MS10-092 - Vulnerability in Task Scheduler Could Allow Elevation of Privilege (2305420)
5. MS10-093 - Vulnerability in Windows Movie Maker Could Allow Remote Code Execution (2424434)
6. MS10-094 - Vulnerability in Windows Media Encoder Could Allow Remote Code Execution (2447961)
7. MS10-096 - Vulnerability in Windows Address Book Could Allow Remote Code Execution (2423089)
8. MS10-097 - Insecure Library Loading in Internet Connection Signup Wizard Could Allow Remote Code Execution (2443105)
9. MS10-098 - Vulnerabilities in Windows Kernel-Mode Drivers Could Allow Elevation of Privilege (2436673)
10. MS10-099 - Vulnerability in Routing and Remote Access Could Allow Elevation of Privilege (2440591)
11. MS10-100 - Vulnerability in Consent User Interface Could Allow Elevation of Privilege (2442962)
12. MS10-101 - Vulnerability in Windows Netlogon Service Could Allow Denial of Service (2207559)
13. MS10-103 - Vulnerabilities in Microsoft Publisher Could Allow Remote Code Execution (2292970)
14. MS10-105 - Vulnerabilities in Microsoft Office Graphics Filters Could Allow for Remote Code Execution (968095)

More information on the issues resolved by these updates is available from the Microsoft website: http://www.microsoft.com/.

Notes:

• HFXCC3267 may not contain all the Security Updates released by Microsoft in December 2010. Please read the More Information section below for further details. 
• The updates provided in HFXCC3267 supersede the previously released Microsoft Security Updates; as such, the following Community Connect 3 workstation packages will be removed from networks (if present) during this Security Update's installation:   
• XP SP3 Security Update KB2279986
• XP SP3 Security Update KB981957
• XP SP3 IE6 Security Update KB2360131
• XP SP3 IE7 Security Update KB2360131
• XP SP3 IE8 Security Update KB2360131
• Windows Vista Media Encoder9 Security Update KB979902
• Microsoft Office XP SP3 Security Update KB924090
• Microsoft Office 2003 SP2 Security Update KB924090
• MS Publisher 2002 SP3 Security Update KB981160
• Publisher 2003 SP3 Security Update KB983235
• Publisher 2007 Security Update KB983235

If you are running a Community Connect 3 network, you should apply this Security Update without delay.

HFXCC3267 should be applied to all Community Connect 3 servers including all domain controllers and all Member Servers (such as DAMMS and MIS servers, or servers running Microsoft Exchange. It does not need to be applied to Community Connect 3 workstations directly, but all servers and workstations will need to be restarted for the Microsoft Security Updates to be applied fully.

Note: HFXCC3267 should not be directly applied to RM Client Connect Terminal Servers. For information on how to apply the server updates to these servers see the 'Installing on Terminal Servers' section below.

Important: All your Community Connect 3 servers will need to be restarted in order to install this Security Update completely. You should therefore plan to install the Security Update out-of-hours to minimise disruption to your network.

1. Click the HFXCC3267.exe file link below to download the Security Update.
2. Choose to Save the file, browse to the temporary location you wish to save it to (for example D:\temp) and click Save.
3. When it has downloaded, follow the installation instructions below to install the Security Update.

Important: During the installation of HFXCC3267, the Station Manager HealthCheck and the allocation of new Microsoft Security Update packages must be done manually. Please ensure that you fully complete all steps in the installation instructions. If you previously started to install the Security Update but cancelled the operation, follow the installation instructions in the 'Installing after cancelling a previous install' section below.

1. Download HFXCC3267.exe.
2. Log on to your first Community Connect 3 domain controller as a system administrator and copy the Security Update to a temporary location (for example D:\temp).
3. Run the Security Update by double-clicking the self-extracting executable file (HFXCC3267.exe). The Security Update will extract files automatically and run the RM Installation Assistant to begin the installation.
4. When prompted, click Continue.
5. The installation will proceed automatically. When prompted that the RM Installation Assistant has finished, click Finish.
6. Repeat steps 2-5 at all your other Community Connect 3 domain controllers.
7. Repeat steps 2-5 at any Member Servers (e.g. DAMMS or MIS servers) on the network.

Note: After installation at a server, the server will need to be rebooted for the Microsoft Security Updates to be applied fully. It is recommended that you ensure each domain controller has rebooted successfully before applying the Software Update to the next server.

8. When all Community Connect 3 domain controllers have had HFXCC3267 applied, log on to the first Community Connect 3 domain controller server in each site as the system administrator. Run Microsoft Windows Explorer and browse to D:\RMNetwork\RMManage\Station Manager. Double-click on the file Healthcheck.exe, and select OK to start the health check and OK again when it has completed.
9. HFXCC3267 provides new workstation packages but does not automatically allocate them. You should allocate these new packages to all your workstations at your earliest convenience.

Note: If you choose to allocate the packages at a later time, you must still complete all of steps 1 to 8 above now, including running the Station Manager HealthCheck.

The new Security Packages are listed as available packages as follows in the RM Management Console (RMMC):

System Packages:

• Vista Security Updates - December 10
• Vista Movie Maker 2.6 Security Update 2424434
• Vista Media Encoder 9 Security Update 2447961
• XP SP3 IE6 Security Update 2416400
• XP SP3 IE7 Security Update 2416400
• XP SP3 IE8 Security Update 2416400
• XP SP3 Media Encoder 9 Security Update 2447961
• XP SP3 Security Update 2296199
• XP SP3 Security Update 2405882XP SP3 Security Update 2423089
• XP SP3 Security Update 2436673
• XP SP3 Security Update 2440591
• XP SP3 Security Update 2443105

Applications:

• MS Office 2003 File Converter Pack Update 968095
• MS Office XP Security Update 968095    
• MS Office 2003 Security Update 968095
• MS Office 2007 System Security Update 968095
• MS Office 2010 (32-Bit) Security Update 968095
• MS Office Publisher 2002 Security Update 2292970
• MS Office Publisher 2003 Security Update 2292970
• MS Office Publisher 2007 Security Update 2292970
• MS Office Publisher 2010 (32-Bit) Update 2292970

Note: If you do not see the above packages in the RM Management Console, please run an Update Package List. To do this, please refer TEC731836 in the Other Useful Articles section below.

Once you have allocated the packages to workstations, restart the workstations at your convenience for the updates to be installed.

1. Browse to D:\RMNetwork\RMManage\RM Hotfixes\HFXCC3267_extracted and double-click the file RM Installation Assistant.exe.

Note: If this folder or its contents do not exist, re-run the HFXCC3267.exe file downloaded from the RM Support website as in step 1 of the installation instructions section above.

2. Follow the procedures from step 4 in the installation instructions section above.

Note: If you have a Terminal Server on your network, please follow the instructions below:

1. Install the RM Security Updates on to your Community Connect 3 domain controllers as described above.
2. Log on to the Terminal Server and browse to the following folder on one of your domain controllers: \\<DC_Server_Name>\RMManage\RM Hotfixes\HFXCC3267_extracted\Utilities\Server Updates\v1.81.0.0\
3. Double-click the Server_Updates.vbs file to install the Microsoft Security Updates.

Note: The Server_Updates.vbs script will run silently on a Terminal Server, however you can check for completion using the following process:

1. Log on to the Terminal Server as Systemadmin.
2. From the Start menu, select Run and type eventvwr then press return.
3. From the right-hand pane, double-click the System event log.
4. In the list of events you should see a number of events with the Source 'NTServicePack' and event ID 4377 which will correspond with the date and time the ServerUpdates.vbs was run. (The number of entries will vary with each update as only updates relevant to the Terminal Server and any other updates relevant to applications installed on these servers, will be installed).

The components of HFXCC3267 will be included in a future Community Connect 3 Service Release or Microsoft Service Pack validated by RM.

The Security Update can be installed on to networks running Community Connect 3 with Service Release 5 or above.

HFXCC3267 is not included in Service Release 5 or 6. It will need to be re-applied if originally installed before Service Release 6 is installed.

Note: The application Software Updates will need to be re-applied if the related Microsoft application is installed or re-installed after the Software Updates were applied.

See the Description section for a full list. HFXCC3267 contains new relevant workstation and server Microsoft Security Updates. 

Software pre-requisites

Please find below details of the software pre-requisites:

• Vista Security Updates - December 10 (System requirements: Windows Vista/Vista SP1/Vista SP2)
• Vista Media Encoder 9 Security Update 2447961 (System requirements: Windows Vista SP1/Vista SP2, Windows Media Encoder 9 Series)
• Vista Movie Maker 2.6 Security Update 2424434 (System requirements: Windows Vista SP1/Vista SP2, Windows Movie Maker 2.6)
• XP SP3 Security Update 2405882 (System requirements: Windows XP SP3)
• XP SP3 Security Update 2296199 (System requirements: Windows XP SP3)
• XP SP3 Security Update 2423089 (System requirements: Windows XP SP3)
• XP SP3 Security Update 2443105 (System requirements: Windows XP SP3)
• XP SP3 Security Update 2436673 (System requirements: Windows XP SP3)
• XP SP3 Security Update 2440591 (System requirements: Windows XP SP3)
• XP SP3 IE6 Security Update 2416400 (System requirements: Windows XP SP3)
• XP SP3 IE7 Security Update 2416400 (System requirements: Windows XP SP3)
• XP SP3 IE8 Security Update 2416400 (System requirements: Windows XP SP3)
• XP SP3 Media Encoder 9 Security Update 2447961 (System requirements: Windows XP SP3, Windows Media Encoder 9 Series)
• MS Office XP Security Update 968095 (System requirements: Windows XP/XP SP2/XP SP3/Microsoft Office XP SP3)
• MS Office 2003 Security Update 968095 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Office 2003 SP3)
• MS Office 2007 System Security Update 968095 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Office 2007 System SP2)
• MS Office 2010 (32-Bit) Security Update 968095 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Office 2010, 32-Bit Edition)
• MS Office 2003 File Converter Pack Update 968095 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Office 2003 SP3)
• MS Office Publisher 2002 Security Update 2292970 (System requirements: Windows XP/XP SP2/XP SP3/Microsoft Publisher 2002 SP3)
• MS Office Publisher 2003 Security Update 2292970 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Publisher 2003 SP3)
• MS Office Publisher 2007 Security Update 2292970 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Publisher 2007 SP2)
• MS Office Publisher 2010 (32-Bit) Update 2292970 (System requirements: Windows XP/XP SP2/XP SP3/Vista/Vista SP1/Vista SP2, Microsoft Publisher 2010, 32-Bit Edition)

 Vista Security Updates - December 10 package includes:

• Windows6.0-KB979687-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB979688-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB2296199-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB2305420-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB2423089-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB2436673-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB2442962-x86.msu (System requirements: Windows Vista SP1/SP2)
• Windows6.0-KB2416400-x86.msu (System requirements: Windows Vista SP1/SP2)
• IE8-Windows6.0-KB2416400-x86.msu (System requirements: Windows Vista SP1/SP2, Internet Explorer 8)

Note: To uninstall an update (MSU) installed by Windows Vista Security Update (MSI):

1. From the Start menu, choose Control Panel and then click Security.
2. Under Windows Update, click 'View installed updates' and select from the list of updates.

Note: To uninstall the updates Vista Media Encoder 9 Security Update 2447961 and Vista Movie Maker 2.6 Security Update 2424434 please follow the steps below:

1. From the Start menu, choose Control Panel and then click Security.
2. Under Windows Update, click 'View installed updates' and select from the list of updates.

More information on December 2010 Microsoft Security Updates could be found from the following Microsoft Security Bulletin: http://www.microsoft.com/technet/security/bulletin/ms10-dec.mspx