**Please note this only applies to Community Connect 3™ and RM Smart-Tools 3 networks**

Important: Microsoft� Windows� Server 2003 Replica servers will reboot immediately after applying this Update. It is recommended that you install the Update out-of-hours.

Before installing any software update, please refer to TEC90813 and DWN59018 in the 'Other Useful Articles' section below. These articles detail RM's recommendations regarding software update installation and support.

Any references to Community Connect 3 in this document apply equally to RM Smart-Tools 3.

HFXCC3094 is included in Service Release 5 for Community Connect 3; if you have installed Service Release 5 on your network you do not need to install HFXCC3094 separately.

Install HFXCC3094 if you have any Microsoft Windows Server 2003 Replica servers in your network.

This Update should be installed on Microsoft Windows Server 2003 Replica servers. (If you install the Update on a Microsoft Windows Server 2003 Forest Root server, any Microsoft Windows 2000 Servers, or any Member servers, no changes will be implemented).

Important: Microsoft Windows Server 2003 Replica servers will reboot immediately after applying this Update.  It is recommended that you install the Update out-of-hours.

HFXCC3094 will remove the following registry key from a Windows Server 2003 replica server:

• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\DnsAvoidRegisterRecords

1. Click the HFXCC3094.exe file link to download the Update.
2. Choose to Save the file, browse to the temporary location you wish to save it to (e.g. D:\temp) and click Save.
3. When it has been downloaded, follow the installation instructions below to install the Update.

Note: If you previously started to install the Update but cancelled the operation, follow the installation instructions in the 'Installing after cancelling a previous install' section below.

Important: The Microsoft Windows Server 2003 Replica server will reboot when this Update is applied.

1.      Download HFXCC3094.

2.      Log on to the Community Connect 3 Replica domain controller running Windows Server 2003 as Administrator (not SystemAdmin) and copy the Update to a temporary location (e.g. D:\temp).

3.      Run the Update by double-clicking the self-extracting executable file (HFXCC3094.exe).  The Update will extract files automatically and run the RM Installation Assistant to begin the installation.

4.      When prompted, click Continue.

5.      The installation will proceed automatically and the server will reboot immediately if the Update determines this action is required.

6.      If the server rebooted, log back on as the same administrator user.

7.      When the RM Installation Assistant has completed the installation, click Finish.

8.   Repeat Steps 2-7 at any other Community Connect 3 Replica domain controllers running Windows Server 2003.

1.      Browse to D:\RMNetwork\RMManage\RM Hotfixes\HFXCC3094_extracted and double-click the file RM Installation Assistant.exe. (If this folder or its contents do not exist, re-run the HFXCC3094.exe file downloaded from the RM Support website.)

2.      Follow the procedure in 'How to install the Update' from step 4 above.

The Update can be installed on to networks running Community Connect 3 with Service Release 4.

HFXCC3094 is included in Service Release 5.