**Please note this only applies to Community Connect 3™ and RM Smart-Tools 3 networks.**

Any references to Community Connect 3 in this document apply equally to RM Smart-Tools 3.

Microsoft� has released significant Security Updates for Windows�. HFXCC3188 contains these Updates in a format easily applied to Community Connect 3 networks.

We recommend that you apply this Security Update without delay. Important: This Security Update can be installed on to Community Connect 3 networks with HFXCC3110B or equivalent, ie RM AppAgent version 1.37.3.0 or greater.

Before installing any Software Update, please refer to TEC90813 and DWN59018 in the Other Useful Articles section below. These articles detail RM's recommendations regarding Software Update installation and support.

When you start a computer that is running Microsoft� Windows� XP with Service Pack 2, certain third-party applications may not start. Additionally, you may receive the following error message:

"Application_executable_name - Illegal System DLL Relocation

The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL".

Microsoft� are aware of this problem occurring when the following third-party applications are installed (note that this is not necessarily an exhaustive list, and may be altered in future):

• Realtek HD Audio Control Panel
• ElsterFormular 2006/2007
• TUGZip 
• CD-Tag

More information on this issue is available from the Microsoft� Web site:  (http://support.microsoft.com/kb/935448/).

• HFXCC3188 should be installed on Community Connect 3 networks with Service Release 4 (SR4) or above and HFXCC3110B or equivalent.
• This Security Update should be installed on to all Community Connect 3 servers.

Note: All servers and workstations will need to be restarted in order to install this Security Update completely. You should therefore plan to install the Security Update out-of-hours to minimise disruption to your network.

HFXCC3188 contains the following Microsoft^� Security Updates:

1. MS07-017: Vulnerabilities in GDI Could Allow Remote Code Execution (925902)

More information on the issues resolved by these Updates is available from the Microsoft� Web site: (http://www.microsoft.com/)

Note: HFXCC3188 may not contain all the Security Updates released by Microsoft� in April 2007. Please read the More Information section below for further details. 

The Updates provided in HFXCC3188 supersedes a previously-released Microsoft� Security Updates; as such, the following Community Connect 3 workstation packages will be removed from networks (if they are present) during this Security Update's installation:

• Windows XP Security Update KB912919
• Windows XP Security Update KB896424
• Windows XP SP1 Security Update KB891711

If you are running a Community Connect 3 network, you should apply this Security Update without delay.

HFXCC3188 should be applied to all Community Connect 3 servers including all domain controllers and all Member Servers (such as DAMMS and MIS servers, or servers running Microsoft� Exchange). It does not need to be applied to Community Connect 3 workstations directly, but all servers and workstations will need to be restarted for the Microsoft� Security Updates to be applied fully.

1. Click the HFXCC3188.exe file link below to download the Security Update.
2. Choose to Save the file, browse to the temporary location you wish to save it to (for example D:\temp) and click Save.
3. When it has downloaded, follow the Installation Instructions below to install the Security Update.

Important: During the installation of HFXCC3188, the Station Manager HealthCheck and the allocation of new Microsoft� Security Update packages must be done manually. Please ensure that you fully complete all steps in the Installation Instructions. If you previously started to install the Security Update but cancelled the operation, follow the installation instructions in the 'Installing after cancelling a previous install' section below.

1. Download HFXCC3188.exe
2. Log on to your first Community Connect 3 domain controller as Administrator (not SystemAdmin) and copy the Security Update to a temporary location (for example D:\temp).
3. Run the Security Update by double-clicking the self-extracting executable file (HFXCC3188.exe). The Security Update will extract files automatically and run the RM Installation Assistant to begin the installation.
4. When prompted, click Continue.
5. The installation will proceed automatically. When prompted that the RM Installation Assistant has finished, click Finish.

Note: After installation at a server, the server will need to be rebooted for the Microsoft� Security Updates to be applied fully. Ensure the server has rebooted successfully before continuing.

6. Repeat steps 2-5 at all your other Community Connect 3 domain controllers.
7. Repeat steps 2-5 at any Member Servers (eg DAMMS or MIS servers) on the network.

Note: After installation at a server, the server will need to be rebooted for the Microsoft� Security Updates to be applied fully. It is recommended that you ensure each domain controller has rebooted successfully before applying the Software Update to the next server.

8. When all Community Connect 3 domain controllers have had HFXCC3188 applied, log in to the first Community Connect 3 domain controller server in each site as the Administrator user (not SystemAdmin). Run Windows� Explorer� and browse to D:\RMNetwork\RMManage\Station Manager. Double-click on the file Healthcheck.exe, and select OK to start the health check, and OK again when it has completed.
9. HFXCC3188 provides new workstation packages but does not automatically allocate them. You should allocate these new packages to all your workstations at your earliest convenience. Note: If you choose to allocate the packages at a later time, you must still complete all of steps 1 to 8 above now, including running the Station Manager health check.

The new Security Packages are listed as available packages as follows in the RM Management Console:

System packages

• Windows XP SP2 Security Update KB925902

Once you have allocated the packages to workstations, restart the workstations for the Microsoft� Security Update to be installed.

1. Browse to D:\RMNetwork\RMManage\RM Hotfixes\HFXCC3188_extracted and double-click the file RM Installation Assistant.exe. Note: If this folder or its contents does not exist, re-run the HFXCC3188.exe file downloaded from the RM Support Web site as in step 1 of the Installation Instructions section above.
2. Follow the procedures from step 4 in the Installation Instructions section above.

The components of HFXCC3188 will be included in a future Community Connect 3 Service Release or Microsoft� Service Pack validated by RM.

The Security Update can be installed on to networks running Community Connect 3 with Service Release 4 or above and HFXCC3110B or equivalent.

HFXCC3188 is not included in Service Release 4 or 5. It will not need to be re-applied if originally installed before Service Release 5 is installed.

Note: The application Software Updates will need to be re-applied if the related Microsoft� application is installed or re-installed after the Software Updates were applied.

See the Description section for a full list. HFXCC3188 contains new relevant workstation and server Microsoft� Security Updates.